Velocette LE "The Everymans Bike"

The Velocette LE was made from 1948 through 1970 in Great Britain.The LE emblem stood for "little engine" of initially 150cc.One of the largest customers was the British Police force,which at one point accounted for half of the production for over 50 forces across the country,the last force to use them was the Kent Constabulary which purchased the remaining spare parts and were able to keep LE's running until 1974.
The police also gave rise to the name "Noddy" bike which came from riders acknoledging their superiors by nodding to them rather than taking their hand of the handle bars to salute.
The Velocette LE was a 150cc four-stroke, water cooled, horizontally-opposed twin cylinder engine, the LE also had a radiator and was fitted with coil ignition to help starting.The final drive was by a shaft mounted in a swing frame with adjustable suspension. Aluminium leg shields were designed to keep the rain off and footboards gave it a scooter feel.
Instruments included a speedometer and trip recorder. To reduce noise and vibration the engine was rubber mounted and the pressed steel frame was lined with soundproofing felt.Carrying capacity was boosted by quickly detachable panniers and a "glove compartment" in front of the petrol tank. All this made the MkI LE expensive, however, at £126 compared with the BSA Bantam at £76.
In 1970 the company went into voluntary liquidation.

Dave Burton
www.bargain-motors.com

The Triumph Tiger Cub

The Tiger Cub was a British motorcycle made by Triumph Motorcycles at their Meriden factory in Coventry,England.This was launched at the Earls Court show in November 1953.The Tiger Cub competed well against the other small capacity motorcycles of the time such as the Villiers two strokes.
The first Tiger Cubs were a derivative of the Triumph Terrier with the same frame and forks.An off-road version the T20C was produced in the late 50's with high level exhaust and improved suspension.The original model had a plunger frame but this was changed to the modern swinging arm and two suspension units in 1957.The later models had the ignition at the end of the crankshaft where as the earlier models were situated on top of the crankcases.The last model made was the T20B Super Cub, which was launched in November 1966, it was discontinued in 1968.

Dave Burton
www.bargain-motors.com

The Scott Flying Squirrel

The Scott Flying Squirrel was a British motorcycle made by The Scott Motorcycle Company between 1926 and the outbreak of WW2.
The Squirrel name was used for Scott motorcycles since 1921 but with the death of the founder Alfred Angas Scott in 1923 the unorthodox Scott two-stroke motorcycles began to become more conventional. Development of the three speed Scott Flying Squirrel began in 1922 as the company was in severe debt and faced receivership. Launched at the 1926 Earls Court motorcycle show, the Flying Squirrel was expensive - nearly twice the cost of a sporting four-stroke motorcycle of the time.The unique water cooled circulation used a convection method known as the thermosyphon system. The bottom end block was painted either green or red for racing or road respectively and featured a centrally positioned flywheel, twin inboard main bearings, overhung crankpins and doors to enable ease of access to the engine. The redesigned three speed gearbox, multi-plate clutch and the repositioned magneto were all significant improvements.
In 1929 Scott achieved third place in the Isle of Man TT and launched a road going TT Replica Flying Squirrel. Following cost cutting the factory also launched a basic touring model in 1929 for under £70. Financial problems continued, however, and in 1931 Scott were unable to ennter the TT or the earls Court show. A three cylinder prototype was developed but Scotts lacked the resources to develop it and on the outbreak of WW2 production ended.
Between 1935 and 1938 the factory at Shipley in Yorkshire produced the B2592 air-cooled Aero engine, based on the Scott Flying Squirrel motorcycle unit.[3] A 25 hp (19 kW) version was also specifically developed to power the notoriously dangerous Flying Flea aircraft.
In 1950 the rights were bought by the Birmingham based Aerco Company and in 1956 they produced what are known as the Birimingham Scotts.